You are here

Ethernet Extender

MOXA EDS-728 Series

24+4G-port Gigabit modular managed Ethernet switch

Wolverine DDW-222

The DDW-222 can be used to extend Ethernet networks over existing copper cables in point-to-point, daisy-chain or redundant ring applications. Also included in the DDW-222 is a RS-232 serial adapter and a 10-port Virtual Com port re-director software.

MOXA EDS-518A Series

The EDS-518A is a standalone 18-port managed Ethernet switch that provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for Gigabit fiber optic communication. The Ethernet redundant Turbo Ring and Turbo Chain (recovery time

Wolverine DDW-225

The DDW-225 is an Industrial Ethernet SHDSL extender with support for redundant rings. The redundant protocol can be used either on the SHDSL interface or on the Ethernet interface.

Wolverine DDW-120

The DDW-120 Ethernet Extender is the ideal solution for extending your Ethernet network over copper cables where in the past the only option would have been fibre. At shorter ranges the data rate will be as high as 15.3 Mbit/s in both directions.

Westermo Wolverine DDW-226

Our Wolverine series of Ethernet extenders, allow cost effective Ethernet networks to be created over long distances at high data rates. The SHDSL technology employed makes it possible to reuse many types of pre-existing but redundant cabling, which could lead to great financial savings.

Wolverine DDW-220

The DDW-220 can be used to extend Ethernet networks over existing copper cables in point-to-point or line sharing applications. Point-to-point transmission distances of up to 10 km can be achieved with data-rates of 5.7 Mbit/s possible over shorter distances on a single copper pair.

Designed by Alipix Creative Design Studio